Pumping station
The Victorian Abbey Mill pumping station on the London trunk sewerage system - no longer in use. |
Contents |
[edit] Introduction
A pumping station is a facility designed to draw and transfer fluids (such as water or sewage) from one location to another. This may be required in low lying areas when the location of the facility prevents the use of just gravity to lift the fluids for distribution.
Pumping stations are sometimes called pumphouses (when associated with irrigation systems or drilled wells), package pumping stations or packaged pumping stations (when used to describe private pumping stations) or lift stations (when describing systems designed for pumping waste or sewage). A pumping station may also be part of a hydroelectric facility.
[edit] Types of pumping stations
Pumping stations can be installed in situations such as; housing estates, healthcare or education campuses, commercial sites, industrial parks and so on. They may even be used for personal residences (such as in situations where a sewer passes over an incline). Depending on their application, facilities may use components including pumps, tanks (also referred to as collection chambers or wet wells), float switches, controllers, pipework and other mechanical devices.
The ornate interior of the Victorian Crossness pumping station. |
[edit] Canal water supplies
In situations where the location of the canal may not be able to reliably maintain the water levels needed to operate the locks, pumping stations may be used to draw water from other locations into the higher levels of the canals. Pumping stations may also be used to transport water from the low locks to the upper locks. This type of arrangement may be referred to as a back pumping system.
[edit] Land drainage
Water pumping stations are sometimes used to drain water from low lying areas that would otherwise be saturated and unsuitable for agriculture. This method may be deployed due to challenges brought on by elevation factors that prevent the use of canals.
[edit] Wastewater pumping stations
These systems are designed to transport waste or sewage material. The material is collected in a chamber (or wet well) until it reaches the level where the pump is activated.
[edit] Private pumping stations
These systems were once used by privately run developments or associations to transport surface water or waste water to a higher elevation.
In 2010, the Government decided that most private pumping stations that form part of the sewer or lateral drain systems that connect to the public sewer network should be transferred to the ownership of the regulated sewerage companies in England and Wales. The deadline for these transfers (referred to as pumping station adoptions) was October 2016.
Ref [[w/index.php?title=W/index.php%3Ftitle%3DW/index.php%3Ftitle%3DW/index.php%3Ftitle%3DW/index.php%3Ftitle%3DRef_https://www.ofwat.gov.uk/publications/transfer-of-private-sewers/%26action%3Dedit%26redlink%3D1%26action%3Dedit%26redlink%3D1%26action%3Dedit%26redlink%3D1%26action%3Dedit%26redlink%3D1&action=edit&redlink=1|https://www.ofwat.gov.uk/publications/transfer-of-private-sewers/]]
[edit] Related articles on Designing Buildings
- Civil Engineering during the Industrial Revolution in Britain.
- Filtration.
- How canals work.
- Ofwat.
- Sewerage.
- Thames tideway tunnel
- The redevelopment of Leicester's sewerage system by Joseph Gordon.
- Water Industry (Scotland) Act 2002.
- Water pressure.
[edit] External resources
Featured articles and news
Commissioning Responsibilities Framework BG 88/2025
BSRIA guidance on establishing clear roles and responsibilities for commissioning tasks.
An architectural movement to love or hate.
Don’t take British stone for granted
It won’t survive on supplying the heritage sector alone.
The remarkable story of a Highland architect.
The Constructing Excellence Value Toolkit
Driving value-based decision making in construction.
Meet CIOB event in Northern Ireland
Inspiring the next generation of construction talent.
Reasons for using MVHR systems
6 reasons for a whole-house approach to ventilation.
Supplementary Planning Documents, a reminder
As used by the City of London to introduce a Retrofit first policy.
The what, how, why and when of deposit return schemes
Circular economy steps for plastic bottles and cans in England and Northern Ireland draws.
Join forces and share Building Safety knowledge in 2025
Why and how to contribute to the Building Safety Wiki.
Reporting on Payment Practices and Performance Regs
Approved amendment coming into effect 1 March 2025.
A new CIOB TIS on discharging CDM 2015 duties
Practical steps that can be undertaken in the Management of Contractors to discharge the relevant CDM 2015 duties.
Planning for homes by transport hubs
Next steps for infrastructure following the updated NPPF.
Access, history and Ty unnos.
The world’s first publicly funded civic park.
Exploring permitted development rights for change of use
Discussing lesser known classes M, N, P, PA and L.
CIOB Art of Building photo contest 2024 winners
Fresco School by Roman Robroek and Once Upon a Pass by Liam Man.